From your artwork
to a loaded container.
Five steps, each with a defined output and a date. No stage starts before the previous one is signed off — which is why we rarely have to redo a canopy.
What happens, in order
01 · Enquiry & specification
Send artwork, quantity and the date you need it in your warehouse. We reply within two business hours with a spec sheet and a production schedule — or with the reason that specification cannot be built.
02 · Sampling
Pre-production sample in 3–7 days. Fabric, frame, trim and print position are confirmed on the physical sample before any deposit. The sample is built to the bulk specification, so nothing is re-decided when the order starts.
03 · Order & deposit
PI issued with the production slot written into it. 50% T/T deposit confirms the slot. Artwork is locked at this point — changes after here move the ship date.
04 · Production & QC
Eight lines running. In-house inspection at semi-finished and finished stages, twelve checkpoints in total. Photo updates weekly, whether you ask or not.
05 · Inspection & shipping
Third-party inspection welcome at any point. FOB Xiamen as standard; CIF or DDP through your forwarder, or ours if you prefer.
Three ways to put
a logo on a canopy.
The method decides the setup, the minimum and how the colour survives a season in the sun. We will tell you which one your artwork actually needs.
| Method | Best for | Colours | Durability | Notes |
|---|---|---|---|---|
| Screen print | Bold logos, flat colour, high volume | Up to 6 | Very good | One screen per colour; the sharpest edge on bold flat marks |
| Heat transfer | Gradients, fine detail, photos | Full colour | Good | One film, so short runs are viable; slightly stiffer hand feel |
| Digital direct | Samples, short runs, complex art | Full colour | Good | No screen at all, so a single test piece is possible; ink sits on the surface |
| Embroidery | Premium marks, small logos | Up to 9 threads | Excellent | Hand feel and perceived value; not suited to fine detail |
Sampling runs per model; a revision is 5–7 days, at our cost if the fault is ours.
Artwork templates with panel dielines and bleed are on the downloads section. Send the file in the template and we will return a print proof before production.
Panels, size, print, handle —
four decisions.
Almost every order is one of these four, or all four. Changing the cut or the print makes it an ODM line with its own sample; changing colour or handle alone usually does not.
Packed for the channel it lands in.
A container going to a hotel group is packed differently from a pallet going into an Amazon fulfilment centre. We ask which one before we quote, because it changes the carton, the poly bag and the label.
- Single carton, 1 pc per carton with pole and base separated
- Colour box or printed sleeve for retail and gift channels
- Poly bag with suffocation warning, barcode and FBA labels
- Mixed cartons so one container can carry a full colour range
- Carton marking to your specification, including handling icons
Canopy fabric
| Fabric | Weight | Fade resistance | Best for | Trade-off |
|---|---|---|---|---|
| Polyester | 180–220 gsm | Standard | Promotional, folding, gift | Entry grade; colour shifts after two or three seasons outdoors |
| Polyester, heavy | 250–300 gsm | Good | Commercial patio, restaurant | Better hand and drape; heavier carton, higher freight |
| Solution-dyed acrylic | 260–300 gsm | Excellent | Hotel and resort, permanent outdoor | The only grade we recommend for a five-year colour target |
| UPF 50+ treated | Any of the above | As base fabric | Beach, poolside, children | Finish washes out slowly; re-treatment not possible aftermarket |
Colours are matched to Pantone on request. For repeat orders we hold the dye lot record, which is the only reliable way to make the third batch match the first.
Poles, ribs and mechanisms
| Component | Options | Notes |
|---|---|---|
| Pole | Aluminium 38 mm / 48 mm, wooden, steel | 48 mm for anything above 3 m span; wooden for hospitality and event stock |
| Ribs | Fibreglass, steel, aluminium | Fibreglass flexes and returns; steel is stiffer and bends permanently in gusts |
| Opening | Crank & tilt, pulley, push-up, auto open | Crank and tilt for commercial; push-up for beach and rental |
| Base | Sold separately: granite, water-filled, cross-plate | Weight depends on canopy size and wind exposure — tell us the site |
| Trim | Scalloped, fringed, double layer, valance | Event and wedding stock; adds hand work, so sampling matters |
Hold it before you commit.
Screen colours are a poor guide to fabric. We courier a swatch kit with the actual fabrics we run, so you can hold it against the terrace, the pool tile and the chair cushions — in daylight, which is the only light that matters.
For custom programmes we then cut a pre-production sample in your colour and with your print position. It ships in 3–7 days, built on the same line as the bulk order.
Start with a sample, not a container.
Tell us the model, the print method and the quantity. Sample in 3–7 days, and the artwork carries straight over to the bulk order.