Swatch kit on request · Samples in 3–7 days · FOB Xiamen · Request a quote
Home/Factory
The factory

Cutting, welding, printing,
packing — one roof.

15,000 ㎡ · 8 automated lines, eight automated production lines. The reason a reorder can hold a colour is that the printing never leaves the building.

Entrance & material racks
Cutting table
Sewing rows
Assembly & wrapping
Production floor
Final inspection
Why it matters

A trading desk cannot hold a colour.

Most umbrella suppliers you will meet are traders: they quote, then place the order with a factory you never see. The colour of your second batch depends on whoever that factory is running for that week.

We cut, print and pack on our own floor. That means the dye lot, the screen and the seam allowance stay the same between orders — and when something goes wrong we can walk to the machine that did it.

Location
Haicang District, Xiamen, Fujian — 20 minutes from Xiamen port
Floor area
15,000 ㎡, cutting, assembly, printing and packing in one site
Lines
Eight automated lines; key-process automation above 70%
In-house
Cutting, welding, screen printing, heat transfer, final QC
Capacity
300,000 pcs a month; single orders up to 100,000 pcs
Defect rate
Held under 0.5% — 100% of finished goods pass a 500-cycle open/close test
Team
40-person export team (EN / ES / RU), 12-person R&D and design
Markets
60+ countries — US, Germany, UK, France, Japan, Australia, Saudi Arabia, Brazil
Port
FOB Xiamen; CIF and DDP through your forwarder
Production process

Nine operations,
in the order they happen.

This is the actual sequence on our floor, photographed station by station. The step that most often delays a shipment is not sewing — it is artwork approval, because it sits outside our control. Which is why we ask for the file early.

01

Major cut

Fabric is cut to the panel pattern on the cutting table. Every panel of an order comes off the same roll lot.

02

Pull edge

The edge is pulled, aligned and tacked before stitching, so the canopy hangs square.

03

Small cuts

Eyelets, notches and clefts are cut by hand where the ribs pass through.

04

Four-piece joining

Four panels joined into a half canopy. This is where a print has to line up across seams.

05

Top

The top hub is stitched — the point that takes the most load when the umbrella opens.

06

Dozen tape

Seam tape run over the stitched join so water cannot track along the needle holes.

07

Bead tail

Tips and beads fitted to each rib end, then checked for pull-out.

08

Eight-slit canopy

Ribs threaded into the canopy and the frame attached, then opened and closed to check the run.

09

QA

100% final inspection on the line: canopy, stitching, shaft, runner, print position.

The position we chose

Small enough to care,
organised enough to ship.

The umbrella trade has two ends. At one end, trading companies that quote quickly and hand production to a factory you never see. At the other, very large mills that will not open a production line for fifty pieces.

We sit in between, deliberately. We own the machines, so the colour holds between orders. We are small enough that a fifty-piece order gets a real production slot, and that the person who quotes you is the person who can walk to the cutting table and check.

Most of our work is OEM and ODM for hotel groups, restaurant terraces, event rental fleets and promotional distributors across North America, Europe, the Middle East and Oceania.

How we work

Four things we hold to.

01

Quote what we can build

If a specification is not buildable at the quality you need, we say so at the quotation stage rather than at the sample.

02

Write it into the PI

Fabric weight, rib count, canopy size and print method go into the proforma invoice. If the goods differ, it is our cost.

03

Show progress without being asked

Weekly photo updates from the floor. You should not have to chase a supplier to find out where your order is.

04

Keep the dye lot

Reorders are matched against the original record, which is the only reliable way to keep a brand colour stable.

Company details

Who you are actually dealing with.

Legal name
XIAMEN LONG SHINE INDUSTRY & TRADE CO., LTD
Factory
Haicang District, Xiamen, Fujian, China
Established
2007 · nineteen years in umbrellas
Floor area
15,000 ㎡ · eight automated lines
Capacity
300,000 pcs a month · defect rate under 0.5%
Markets
North America, Europe, Middle East, Oceania
Business
OEM & ODM manufacturing, no retail

See the factory →

Want to see it running?

We will walk the floor on a video call, or send the film — whichever is faster for you. Ask for a specific machine and we will show that one.